SimpliSafe Camera is one of the leading models in the security camera industry. Likewise, these cameras guard your premises with colored night vision as well. However, including such features, users occasionally face SimpliSafe camera blinking red light issues.
Additionally, the above-discussed issue arises due to many reasons. Primarily, the red light represents that the camera is not connected to the wifi. It may be due to the connection drop-off or poor network signals. Similarly, several other causes are also liable for SimpliSafe camera flashing red light errors which we will reveal afterward. Thus to explore more, have a look on this page!
What are the Reasons for Red Light on SimpliSafe Camera?
However, many causes are liable for the red light blinking on your surveillance device. So, here are some of the prior reasons mentioned below:
- Looseconnections or damaged wires
- Signal interferences
- Camere is out of network range
- 5G bandwidth frequency
- Subscription is ended
- No network or ISP issues
How to Troubleshoot SimpliSafe Camera Blinking Red?
Now, as you are aware of the causes of the red light on SimpliSafe camera. So, it is essential to resolve this issue timely for the optimal functioning of the surveillance device. Hereon, in this section, we are going to learn about the strategies to resolve the issue. Let’s have a look at some troubleshooting methods to fix the problem:
Stabilize the Internet
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Fix the Cables
When the device loses the internet connection, loose or faulty wires can be a major reason. For this, fix the loose cables or replace them with a new one, if damaged.
Update the Firmware
If the window prompts for an upgrade, then proceed with the upcoming guidelines. Ensure you have downloaded the compatible and latest firmware file version of the SimpliSafe camera.
Check the Cable Connections
Ensure that the SimpliSafe camera is connected appropriately at both ends. Check that the ethernet cable is not frayed or tangled.
Relocate the Surveillance Device
Make sure the camera is placed within the router’s network range. If it is not, then unmount it and reposition it.
Power Cycle the Camera
To fix the technical errors and the connectivity issues, power cycle your camera and the base stations. It will give a fresh start to your device.
Ensure the Sufficient Power Supply
Check that the camera and the connected devices have an adequate power supply. The adapter and the power cables are the originals that you use.
Choose the 2.4GHz Frequency
SimpliSafe cameras do not support 5GHz band frequency. If your networking device is set to be at 5GHz, then change the network configuration and adjust it to 2.4GHz.
Contact your ISP Authorities
If internet connectivity errors persist, then contact your ISP authority and follow the guidelines they explain to you.
Renew the Subscriptions
If your SimpliSafe subscription has ended, then renew it as it may also cause disconnectivity errors.
Factory Reset the Surveillance Device
If the above-mentioned fix-outs don't work, then master reset your Simplisafe camera. It will revert the camera to its default settings and you have to reconfigure it from scratch. To know the SimpliSafe camera red light procedure, reach out to us here!
Final Remarks
Last but not least, the above-given information regarding the SimpliSafe camera blinking red light helps you understand the reasons behind this issue. Also, you find suitable and effective troubleshooting methods to resolve the red light issue.
If you are seeking more help regarding the same, then get in touch with our experts on our website!
